Model: T-1 Digital
Thermometer (Extra charge of validation at HK$300/US$39/RMB253 for each year)
Press MODE for 3 seconds, the minute starts gleaming,
Adjust the minute by pressing ADJ,
Press MODE again to set up the hour,
Adjust the hour by pressing ADJ,
After the adjustment of both minute and
Press MODE again to confirm.
Turn ON alarm clock:
Press MODE once to TURN ON the
Press MODE once again to hear a ‘click’
‘Bell’ emblem displays and ‘minute’ gleams;
Press ADJ to adjust the ‘minute’;
Press MODE once to confirm the
‘minute’ and the ‘hour’
Press MODE once to confirm the ‘hour’
and the alarm clock set.
The ‘Bell’ emblem gleams for about 1 minute and displays still.
The time clock displays at the same time.
OFF ALARM CLOCK:
Press MODE once to set Alarm Clock display,
Press ADJ once and ‘Bell’
Press MODE again to confirm TURNING
OFF the alarm clock and time clock displays
Press RESET key at the first time of use or after replacing with new
Using one piece of 3A 1.5v battery.
Device should be used under the
environment in temperature of 0C ~50C
Indoor : 0C~50C (32F~120F)
-20C – 70C (-4F – 158F)
Resolution : 0.1C (0.1F)
C and F
Environment : 30% RH – 90% RH
+/- 5% (40% - 80%)
+/- 8% (Others)
Error Symbol : --.-C or --%
Clock System: 12 / 24 Hours
Press ADJ key to switch 12 or 24 hours
OF MAX & MIN
Temperature & Humidity
MODE : Clock & Alarm switching and setting.
Adjust to the correct timing and switch to 12 / 24 hours as required
Indicate Max and Min of Temperature and Humidity recorded.
/ F : Switching temperature from C to F or From F
Cleaning all the settings and memories and back to original status